7
COMBINATION INSTRUMENT
49
7.5
indicator lamps
401813-01
Possible states
The high beam indicator lamp lights up blue
–
The high beam is switched
on.
The immobilizer indicator lamp lights up or flashes red
–
Status or error
message for immobilizer/alarm system.
The oil pressure warning lamp lights up red
–
Engine oil pressure is too
low.
The general warning lamp lights up yellow
–
An operating safety (warning)
message was detected. This is also shown on the matrix display.
The left turn signal lamp flashes green simultaneously with the turn signal
–
The left turn signal is switched on.
The idle indicator lamp lights up green
–
The transmission is shifted to
idle.
The right turn signal lamp flashes green simultaneously with the turn signal
–
The right turn signal is switched on.
The engine warning lamp lights up/flashes yellow
–
The engine control unit
has detected a fault.
The ABS lamp lights up/flashes yellow
–
ABS is not active. The ABS lamp
also lights up when an error is detected.
The TC lamp lights up/flashes yellow
–
Traction control is not enabled or is
currently intervening. The TC lamp also lights up when an error is detected.
Summary of Contents for 1290 SUPERDUKE R
