KTM 1290 SUPERDUKE R, Owner'S Manual, Page: 36 / 213

6 CONTROLS
34
6.4.2 Light switch
L01407-10
The light switch

is fitted on the combination switch on the left.
Possible states
Low beam on
–
Light switch in position  . In this position, the low beam
and tail light are switched on.
High beam on
–
Light switch in position

. In this position, the high
beam and tail light are switched on.
Headlight flasher
–
Push the light switch into position

.
6.4.3 Hazard warning flasher switch
L01406-11
The hazard warning flasher switch  is fitted on the combination switch on the left.
The hazard warning flasher is used to indicate emergency situations.
Info
The hazard warning flasher can be activated or deactivated while the ignition is
switched on or up to 60 seconds after the ignition is switched off.
Only keep the hazard warning flasher activated as long as necessary as it depletes
the battery.
Possible states
Hazard warning flasher on
–
All four turn signals and the green turn signal
indicator lights in the combination instrument flash.