MAINTENANCE WORK ON CHASSIS AND ENGINE
79
11.86
Refilling with coolant
x
Warning
Danger of poisoning
Coolant is poisonous and a health hazard.
–
Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and con-
tact a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immedi-
ately. Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.
B00071-10
(All 125/150/200 models)
–
Make sure that screw
is tightened.
–
Stand the motorcycle upright.
–
Fill the radiator completely with coolant.
Coolant
1.2 l (1.3 qt.)
Coolant (
p. 130)
Coolant (mixed ready to use)
(
p. 130)
B00091-10
–
Loosen screw
until coolant that does not contain any bubbles escapes.
Replace and retighten screw
.
Guideline
Remaining screws, engine
M6
10 Nm
(7.4 lbf ft)
B00072-10
(All 250/300 models)
–
Make sure that screw
is tightened.
–
Stand the motorcycle upright.
–
Fill the radiator completely with coolant.
Coolant
1.2 l (1.3 qt.)
Coolant (
p. 130)
Coolant (mixed ready to use)
(
p. 130)
0 0 A
A
400677-10
–
Position the vehicle as shown and secure it against rolling away. A height differ-
ence of
must be reached.
Guideline
Height difference
75 cm (29.5 in)
Info
To ensure that all of the air can escape from the cooling system, the
front of the vehicle must be jacked up. A poorly bled cooling system is
less effective at cooling and may result in overheating of the engine.
–
Place the vehicle back on a level surface.
B00073-10
–
Fill the radiator completely with coolant.
–
Mount radiator cap
.
–
Run the engine until it is warm.
–
Check the coolant level. (
p. 77)
Summary of Contents for 125 EXC EU 2010
Page 2: ......
Page 121: ...119...
Page 122: ...WIRING DIAGRAM 120...
Page 125: ...WIRING DIAGRAM 123...
