MAINTENANCE WORK ON CHASSIS AND ENGINE
54
11.37
Checking the play in the throttle cable
B00026-10
–
Move the handlebar to the straight-ahead position.
–
Push back bellows
.
–
Pull back the throttle cable casing until you sense a resistance.
–
Now check throttle cable play
.
Play in throttle cable
3… 5 mm (0.12… 0.2 in)
» If the throttle cable play does not meet specifications:
–
Adjust the play in the throttle cable.
x
(
p. 54)
–
Push on bellows
. Check the throttle grip for smooth operation.
11.38
Adjusting the play in the throttle cable
x
B00026-11
–
Move the handlebar to the straight-ahead position.
–
Push back bellows
.
–
Loosen nut
. Turn adjusting screw
in as far as possible.
–
Turn the adjusting screw so that there is play
at the outer casing of the throttle
cable.
Guideline
Play in throttle cable
3… 5 mm (0.12… 0.2 in)
–
Tighten the nut.
–
Push on bellows
. Check the throttle grip for smooth operation.
11.39
Checking the chain for dirt
400678-01
–
Check the chain for heavy soiling.
» If the chain is very dirty:
–
Clean the chain. (
p. 54)
11.40
Cleaning the chain
Warning
Danger of accidents
Oil or grease on the tires reduces their grip.
–
Remove oil and grease with a suitable cleaning material.
Warning
Danger of accidents
Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Environmental hazard
Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
The service life of the chain depends largely on its maintenance.
Summary of Contents for 125 EXC EU 2010
Page 2: ......
Page 121: ...119...
Page 122: ...WIRING DIAGRAM 120...
Page 125: ...WIRING DIAGRAM 123...
