KTM 125 EXC EU 2010, Owner'S Manual, Page: 92 / 140

MAINTENANCE WORK ON CHASSIS AND ENGINE
90
–
Start the engine and check that it is oil-tight.
–
Check the gear oil level. ( p. 88)
11.110
Adding gear oil
x
Info
Too little gear oil or poor-quality oil results in premature wear of the transmission.
The gear oil must be added when the engine is cold.
–
Place the motorcycle on a level surface.
B00049-10
(All 125/150/200 models)
–
Remove gear oil level check screw

.
B00050-10
(All 250/300 models)
–
Remove gear oil level check screw

.
B00053-11
–
Remove screw cap

.
–
Add gear oil until it flows out of the hole of the gear oil level check screw.
Engine oil (15W/50) ( p. 130)
–
Mount and tighten the gear oil level check screw.
Guideline
Screw, gear oil level check M6 10 Nm (7.4 lbf ft)
–
Mount and tighten screw cap

.
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may
result in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
–
Start the engine and check that it is oil-tight.