KTM 125 EXC EU 2010 Page 31 Owner'S Manual Download

Page: 31 / 140

GENERAL TIPS AND HINTS ON PUTTING INTO OPERATION

600870-01

–

Mount the rain cover for the air filter.

Rain cover for air filter (59006021000)

Info

Follow the

KTM PowerParts

mounting instructions.

–

Adjust the carburetor jetting and setting.

Info

The recommended carburetor tuning is available from your authorized KTM
workshop.

600868-01

–

Clean the chain.

Chain cleaner (

p. 132)

–

Mount the steel sprocket.

Tip

Do not lubricate the chain.

–

Clean the radiator fins.

–

Carefully align bent radiator fins.

8.6

Preparations for riding on wet and muddy surfaces

–

Seal the air filter box.

Tip

Seal the air filter box at the edges to prevent dirt from entering.

–

Clean the air filter.

(

p. 82)

Info

Check the air filter approx. every 30 minutes.

600870-01

–

Mount the rain cover for the air filter.

Rain cover for air filter (59006021000)

Info

Follow the

KTM PowerParts

mounting instructions.

–

Adjust the carburetor jetting and setting.

Info

The recommended carburetor tuning is available from your authorized KTM
workshop.

600868-01

–

Mount the steel sprocket.

–

Clean the motorcycle. (

p. 93)

–

Carefully align bent radiator fins.

Summary of Contents for 125 EXC EU 2010













































































































































Search results

Summary of Contents for 125 EXC EU 2010

Reviews:

Related manuals for 125 EXC EU 2010

Brands by name

Popular brands

KTM 125 EXC EU 2010, Owner'S Manual

Search results

Summary of Contents for 125 EXC EU 2010

Reviews:

Related manuals for 125 EXC EU 2010

Brands by name

Popular brands