KTM 125 EXC EU 2010, Owner'S Manual

Page: 53 / 140

MAINTENANCE WORK ON CHASSIS AND ENGINE
51
(XC)
–
Position the brake line. Put on the clamp and mount and tighten screws

.
–
Install the front wheel.
x
( p. 67)
11.27
Removing the fork protector
x
–
Remove the fork legs. x ( p. 49)
500105-10
–
Remove screws

on the left fork leg. Lift off the fork protector.
–
Remove the screws on the right fork leg. Lift off the fork protector.
11.28
Installing the fork protector
x
500105-10
–
Position the fork protection on the left fork leg. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Install the fork legs. x ( p. 50)
11.29
Removing the front fender
500092-10
–
Remove screws

. Remove the front fender.
–
Make sure the spacers remain in place.
11.30
Installing the front fender
500092-10
–
Ensure that the spacers are mounted in the fender.
–
Position the front fender. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Info
Make sure the holding lugs engage in the start number plate.