KSP N305-150, Instruction And Maintenance Manual, Page: 25 / 42

44
45
8.
Using the device
The device is designed to lift and move the User across short distances, within the load and use
limits indicated in this manual.
The device does not generate any side effects but may lead to a situation of risk if not used within
the limits and manner described in this document.
If the operating and safety levels change, for example anomalies as indicated in this manual or of
any other type, that could jeopardise operation or safety of the device in any stage, including
transport, use, maintenance, repair interventions, disposal etc., proceed as follows:
‐ immediately stop using the device;
‐ place the device in a safe area to which only authorised personnel has access;
‐ affix a sign with the words ‘DO NOT USE. CONTACT THE MANUFACTURER’.
The environmental conditions of use are indicated in this manual. Do not use the device if the
environmental conditions of use are different (for example, temperature, humidity,
electromagnetic fields, etc.).
WARNING
The device must not be installed or connected to other devices or systems.
WARNING!
Modifications to this device are strictly forbidden.
Contact the Manufacturer for additional technical descriptions.
8.1 Initial start‐up
Check to make sure that the device has been assembled correctly. Please refer to the
designated section for further details on the correct assembly procedure.
The device raising and lowering operations by the user may require the presence of more
than one operator. The specific procedures depend on the health and weight of the User,
and on the type of sling used. For this purpose, follow the official procedures of the facility
where the patient is staying or of the attending physician.
Before starting the device, check that the batteries are fully charged by following the
indications provided in the section on the interfaces or batteries.
Adjust the sling according to the instructions provided in the sling manual and
by the attending physician.
126 127