KSP N305-150, Instruction And Maintenance Manual, Page: 10 / 42

14
f) If a malfunction/accident/failure occurs during the transfer, never leave the device with the
boom in the suspended position with the User on board. Secure it in the safety position as
described in the section, ‘Instructions for Emergency Situations’. Do not try to resolve the
problem during the transfer, especially when a person is on board. Ask other staff members
to assist and never leave the User unattended, unless this is unavoidable;
g) Behaviour which stems from ‘taking the path of least resistance’ when performing a task.
The device is only designed to transport persons. Therefore, the transport of objects is
strictly prohibited. The same also applies to the transport of persons who are holding
objects, belongings or pets;
h) Foreseeable behaviour by certain patient categories (children, the disabled, etc.,). Also in
this case, it is essential to use only properly selected personnel who has undergone
appropriate training. Never allow unauthorised personnel to handle the device. If no
authorised personnel is available, remove the starter key or battery and store it in a safe
place. F
or non‐electric devices, attach a key locking device, such as a anti‐theft cable or chain
used for bicycles. Only personnel with adequate knowledge of the device and the use and
maintenance manual is authorised to use it.
15
5. Transport, handling and unpacking
5.1 Packaging and transport
The device is shipped in cardboard packaging and is suitably protected from the vibrations caused
during normal transport. The package must be transported in the upright position, avoiding any
impact or sudden movements. Upon receiving the package, it must be thoroughly checked to make
sure that the packaging is intact. If the package appears damaged, the courier service which
performed the delivery should be notified immediately.
If the packaging was damaged during transport, the device must first be inspected by the
Technical Support Service or personnel authorised by KSP Italia before it is commissioned.
 The device must not be used if, upon delivery, it shows signs of damage caused during
transport. Notify the Technical Support Service to have the device inspected and
overhauled.
 The Operator should be trained to use the device without a person on board, practising all
the lifting, descending and manoeuvring phases on a flat surface, and in the rooms where
it will actually be used, in order to acquire proficiency.

The person operating the device must in good physical condition and capable of supporting
and managing the weight of the device and of the User.
 The Operator must be fully acquainted with the contents of the manual and the symbols
used.
 It is extremely important that the Operators verify their own ability to perform manoeuvres
and the suitability of the rooms by completing trial runs where the device is to be used.
 Daily use of the device must only occur after ensuring that all the functional parts and safety
devices are in good working order.
The packaging for the complete device includes 1 item:
Products Dimensions W x D x H (mm)
Series 300 665 x 1160 x 270
Series 500 700 x 1330 x 470
Series 700‐800 700 x 1330 x 470
96 97