3 Transport/Temporary Storage/Disposal
14 of 132
Amacan P
Pulling the pump set upright with one
crane
Pulling the pump set upright with two
cranes
ü
Suitable lifting equipment has been selected (e.g. crane).
1. a) For one piece of lifting equipment: Attach the eyehook to the bail of the
pump set.
b) For two pieces of lifting equipment: Attach one eyehook to the bail of the
pump set.
Then
suitably loop a rope around the pump set and attach this loop
to the second crane hook.
2. Lift the pump set with the lifting equipment.
ð
Guiding the pump set over the edge of the bellmouth or pump casing is only
permissible on a wooden base!
ð
Protect the power cable against kinking!
3. Place the pump set on a level, clean surface and protect it against tilting, tipping
over or rolling off.
3.2.3 Transporting the pump set
WARNING
Incorrect positioning/placing down
Personal injury and damage to property!
▷
Position the pump set vertically with the motor on top.
▷
Use appropriate means to secure the pump set against tilting and tipping over.
▷
Refer to the weights given in the data sheet/on the name plate.
WARNING
Incorrect handling of the power cable
Personal injury and damage to property!
▷
Secure the power cables against falling down.
▷
Avoid power cables being laid on surfaces without fastening.
▷
When moving the pump set keep at a safe distance from the power cables.
WARNING
Improper lifting/moving of heavy assemblies or components
Personal injury and damage to property!
▷
Use suitable transport devices, lifting equipment and lifting tackle to move
heavy assemblies or components.
