Krups 875E, Manual

Page: 34 / 291

28
HOW DO I ADJUST THE HEIGHT OF THE COFFEE NOZZLES?
For all drinks, you can adjust the coffee nozzles according to the size of your cup(s).
HOW DO I PREPARE MY DRINK?
Refer to the “How to make drinks?” tutorial saved in your machine
HELP AND TUTORIALS
DIFFERENT SETTINGS ARE AVAILABLE, DEPENDING ON THE DRINK:
.
One or two cups: to start the double recipe, select the drink and press .
.
Coffee strength: to increase or decrease the strength of the coffee by changing the amount of ground coffee, select
your drink and choose between 1 and 3 beans, with 1 being the softest and 3 being the most full-bodied
.
.
Cup volume: to increase or decrease the cup volume, scroll up or down the list of volumes and select the one
you want.
For more information, see the drinks table in the instructions.
TIP
To select the coffee strength and cup volume, you can navigate up/down or press directly on your choice.
HOW DO I STOP A DRINK MID-PREPARATION?
Warning: You can stop the preparation of a drink at any time by pressing the
STOP
button. When a cycle is interrupted,
it does not stop immediately. The machine will be unavailable for a time, as indicated by a message on the screen.
MILK-BASED DRINKS
TIPS
For frothed milk, use pasteurised UHT milk straight from the fridge (3–5°C). It is possible to use special milks (micro
filtered, raw, fermented, enriched) or plant-based milks (rice, oat or almond milk), but this can give less satisfactory
results in terms of quality and quantity of the froth.
HOW DO I START THE PREPARATION OF A MILK-BASED DRINK?
Refer to “2 PREPARING A MILK-BASED RECIPE” earlier in the instructions, or see the “Starting a milky drink” tutorial
stored in your machine.
HELP AND TUTORIALS
TEAS AND INFUSIONS
For your teas and infusions, there are three selection buttons so that you can choose the temperature best suited to
each type of tea. The temperature used for green tea will be lower than that used for black tea or infusions.
HOW DO I SET THE WATER TEMPERATURE?
SETTINGS
Go to Settings > Water temperature. You can choose
between T1, T2 and T3, where T1 is the coolest and T3
is the hottest.
When you decrease/increase the temperature, this will decrease/increase the temperature for each type of tea
but the temperature used for green tea will always be lower than that used for black tea or infusions.