Krüger & Matz KM0821, User Manual

Page: 9 / 18

User’s manual User’s manual
EN
16
EN
17
12:0
0
1
10
13
11
14
9
12
2 3 4 5
6
8
7
OPERATION
Tu turn on the device, plug the power cord to a power
outlet. After inserting the batteries, the time settings
will be kept after power cutout.
Setting the clock
1. The first time the device is turned on, the display
will show a flashing 00:00, indicating that the
clock is not set.
2. Press the HOUR button to set the hour. Press the
MINUTE button to set the minutes. Press and hold the
HOUR or MINUTE button to quickly change the time.
3. After setting the correct time, press the time set
button or wait 5 seconds. After 5 seconds, the time will
be set.
To change set time:
1. Make sure that the radio is switched off. To do
this, press and hold the Radio button.
2.Press and hold the set time button, until the time
on display flashes.
3.Repeat steps 2-3 from previous paragraph.
• To display seconds, press the set time button.
After 5 seconds, the device will show the current
time back.
Changing the dim settings / changing the Daytime
Saving Time
• Press the dimmer button to change the dim
settings.
• Press and hold the DST button to switch to
Daytime Saving Time. The DST will be indicated by
the DST indicator.
Setting the alarm
Attention: if you want the alarm sound to be the
radio, set the radio and the volume before setting
the alarm.
1. Make sure that the radio is switched off.
2.Press the Alarm 1 or 2 button. The time will start
flashing and the corresponding alarm indicator
will flash as well.
3.Use the HOUR and MINUTE buttons to set the
alarm time.
4.Press the Alarm 1 or 2 button to confirm the alarm
time (or wait 5 seconds).
5.Press the Alarm 1 or 2 button again to choose the
alarm sound: radio or buzzer.