Krüger & Matz KM0821, User Manual

Page: 10 / 18

User’s manual User’s manual
EN
18
EN
19
After the alarm is activated on set time:
• Press the Radio button to turn off the alarm.
• Press the snooze button to activate 9-minute
snooze.
• To turn off the snooze, press the Radio button.
• If the alarm is not deactivated by the button, it will
turn off automatically after one hour.
• Alarm will switch on after 24 hours. To turn off the
alarm, keep pressing the Alarm 1 or 2 button, until
the alarm indicator turns off.
Set timer
The device has the automatic timer functions. To set
it up:
1. While listening to the radio, press the snooze
button. A flashing number 90 will appear on the
display, indicating the time to automatic switch off.
2.Keep pressing the snooze button until you reach
the desired time.
3.After 2 seconds from the selected off time, the
display will show the current time again and the
radio will turn off after the set time.
4.Press the snooze button to display time to turn off.
5.To turn off the timer function, press the snooze
button until OFF appears on the display, or turn off
the radio.
FM Radio
• Press the Radio button to turn on the radio. The
display will show the current frequency and the
current time after 5 seconds.
• Press and hold the Radio button to turn off the radio.
• To change the volume level, use the volume
buttons.
• To set the frequency, use the tuning buttons.
• To enable automatic channel scanning, press and
hold one of the tuning buttons.
Saving radio stations
1. Set the frequency.
2.Press and hold the program button. The channel
number will appear on the display.
3.Select the channel number with the tuning buttons.
4.After selecting channel press the program button
within 8 seconds from selecting the channel. If the
choice is not confirmed within 8 seconds, the
channel will not be saved.
5.If the selected channel already has a frequency
saved, the saved station will be overwritten.
6.To go to the saved channel (while listening to the
radio), press the program button. Saved station
will be selected, and the channel number will
appear on the display.
Battery back-up
When batteries (2x AAA 1.5V batteries) are inserted
into the device, the currently set time will be
maintained during a power outage. During a power
outage, the display will not be illuminated. When
power is restored, the correct time will be set. If
there is no power for a long time, or the battery level
is low, the restored time may be different from the
correct time. Take out the batteries if the device is
not going to be used for a long time.