manualshive.com logo in svg

Krone Swadro TC 1000, Operating Instructions Manual

Share
Download
Krone Swadro TC 1000 Operating Instructions Manual Download Page 63

 

Operation

 

63 

 

Pos: 33.1 /Überschriften/Überschriften 1/A-E/Bedienung @ 0\mod_1199789505403_78.docx @ 34825 @ 1 @ 1 

 

10 

Operation  

Pos: 33.2 /BA/Sicher heit/2. Vor angestellte Warnhi nweise/WARNUNG -  Nichtbeachtung der grundl egenden Sicherheitshinweise alte F orm @ 254\mod_1397485793575_78.docx @ 1953347 @  @ 1 

 

 

WARNING! 

If the basic safety instructions are not followed, people may be seriously injured or 

killed.  

•  To avoid accidents, the basic safety instructions in the chapter Safety must have been 

read and followed, see chapter Safety "Basic safety instructions". 

 

Pos: 33.3 /BA/Sicher heit/2. Vor angestellte Warnhi nweise/WARNUNG -  Nichtbeachtung der Sicherheitsr outinen al te For m @ 273\mod_1404117435996_78.docx @ 2058712 @  @ 1 

 

 

WARNING! 

If the safety routines are not adhered to, people may be seriously injured or killed.  

•  To avoid accidents, the safety routines in the chapter Safety must be read and followed, 

see chapter Safety "Safety routines". 

 

Pos: 33.4 /BA/Bedi enung /Schwader/Achtung M aschine ist für Vor wärtsfahrt konzi piert. @ 291\mod_1410427944026_78.docx @ 2294406 @  @ 1 

 

 

CAUTION! - Do not drive in reverse when using the machine for work. 

Effect: Damage to the machine. 
The machine is designed to travel forwards. Never reverse while the machine is in switched on 

and in working position. Lift rotors first. 

 

Pos: 33.5 /Layout M odul e /----------------Leerzeile-------------------- @ 240\mod_1395147357027_0.docx @ 1890988 @  @ 1 

 

 

Pos: 33.6 /Überschriften/Überschriften 2/U-Z/ZZinkenschutze von den Zinkenspitzen entfer nen @ 36\mod_1262940295076_78.docx @ 338395 @ 2 @ 1 

 

10.1 

Removing the tine protections from the tine tips  

Pos: 33.7 /BA/Bedi enung /Schwader/Zi nken / Zi nkenarme/Zinkenschutze entfernen TC 1000 @ 333\mod_1429121274103_78.docx @ 2546147 @  @ 1 

 

3

TC1000007

2

1

 

Fig. 33 
•  Turn off the tractor and secure it against the possibility of rolling back. 
•  Remove the tine guards (1) from the machine. 
•  Insert the tine guards into the support (2) and secure them with linch pins (3). 
•  Repeat this process for the other side of the machine. 
 

Pos: 33.8 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TC 1000





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands