Krone Swadro TC 1000 Operating Instructions Manual Download Page 61

Page: 61 / 132

Driving and Transport

Pos: 31.11 /BA/Bedienung /Schwader/Fahr en i m Hangbereich_Schwader @ 306\mod_1416229335569_78.docx @ 2379826 @ 2 @ 1

9.2

Driving on Slopes

WARNING!

Travelling on an incline
As long as the machine is used transverse to slope and the outrigger arms are folded in or

folded down, the machine may tilt. Thus there is a risk of serious injuries or death.
• Never move the outrigger arms from working position to transport position or from transport

position to working position as long as the machine is positioned across an incline.

KS102325

Fig. 31

Pos: 31.12 /Layout Module /----------------Leerzeile 5 Pt.-------------------- @ 120\mod_1342592918145_0.docx @ 1092566 @ @ 1

Pos: 31.13 /Ü berschriften/Z wischenüberschriften/A-EBei Ausführ ung nachl aufende Tasträder @ 305\mod_1415614256614_78.docx @ 2370335 @ @ 1

For the version with trailing guide wheels

Pos: 31.14 /BA/Bedienung /Schwader/Nachl aufende Tasträder festsetzen, Ver weis Kap. Ei nstellungen @ 305\mod_1415614542977_78.docx @ 2370366 @ @ 1

In order to prevent the machine from drifting off when driving on the slope, the trailing guide

wheels must be fixed, refer to chapter Settings “Fixing the Trailing Guide Wheels”.

Pos: 31.15 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Summary of Contents for Swadro TC 1000





































































































































Search results

Summary of Contents for Swadro TC 1000

Reviews:

Brands by name

Popular brands

Krone Swadro TC 1000, Operating Instructions Manual

Search results

Summary of Contents for Swadro TC 1000

Reviews:

Brands by name

Popular brands