Krone Swadro TC 1000 Operating Instructions Manual Download Page 42

Page: 42 / 132

Commissioning

Pos: 27.10.1 /Ü berschriften/Ü berschriften 2/U-Z/VVorber eitungen am Tr aktor @ 2\mod_1202363643678_78.docx @ 58694 @ 2 @ 1

7.2

Preparations on tractor

Pos: 27.10.2 /Ü berschriften/Ü berschriften 3/U-Z/U nterlenker ei nstellen @ 6\mod_1214454896135_78.docx @ 94186 @ 3 @ 1

7.2.1

Adjusting the lower suspension arms

Pos: 27.10.3 /BA/Erstinbetriebnahme/Schwader/Swadro 807_810_907/Bil d_Aushubvorrichtung Tr aktor @ 2\mod_1202364384960_78.docx @ 58789 @ @ 1

KS-0-030

Fig. 12

Pos: 27.10.4 /Layout Module /----------------Leerzeile 5 Pt.-------------------- @ 120\mod_1342592918145_0.docx @ 1092566 @ @ 1

Pos: 27.10.5 /BA/Erstinbetriebnahme/Schwader/Swadro 807_810_907/Hinweis U nterlenker @ 2\mod_1202364126303_78.docx @ 58751 @ @ 1

Note

The tractor lower suspension arms must always be installed so that the lifting points of the

lower suspension arms are all at the same distance from the ground. In order to prevent

swivelling of the machine during transport or operation, the lower suspension arms must be

secured by limiting chains or bars.

Pos: 27.11 /BA/Erstinbetriebnahme/Wender/Hinweis - Je nach Tr aktortyp evtl. Anhängekupplung abbauen. @ 172\mod_1370506026261_78.docx @ 1479993 @ @ 1

CAUTION! – Collision with the trailer coupling

Effect: Damage to the tractor or machine
Depending on the type of tractor, the top link of the tractor and/or the universal shaft of the

machine could collide with the trailer coupling.
• To prevent damage, it may be necessary to detach the trailer coupling. For further

information refer to the tractor manufacturer's operating instructions.

Pos: 27.12 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Summary of Contents for Swadro TC 1000





































































































































Search results

Summary of Contents for Swadro TC 1000

Reviews:

Brands by name

Popular brands

Krone Swadro TC 1000, Operating Instructions Manual

Search results

Summary of Contents for Swadro TC 1000

Reviews:

Brands by name

Popular brands