manualshive.com logo in svg

Krone Swadro TC 1000, Operating Instructions Manual

Share
Download
Krone Swadro TC 1000 Operating Instructions Manual Download Page 18

Safety

 

 

18 

 

Pos: 18.6.37 /Ü berschriften/Ü berschriften 3/P-T/SSchutzvorrichtung en funktionsfähig halten @ 187\mod_1380021062004_78.docx @ 1607105 @ 3 @ 1 

 

3.3.10 

Keeping safety devices functional  

Pos: 18.6.38 /BA/Sicherheit/1. Grundlegende Sicher heitshinweiseSchutzvorrichtung en funktionsfähig halten_fuer alle @ 453\mod_1464012282699_78.docx @ 3080198 @  @ 1 

 

If safety devices are missing or damaged, people may be seriously injured or killed by moving 

machine parts. 
•  Replace damaged safety devices. 
•  Remount dismounted safety devices and all other parts before start-up and move them to 

protective position. 

•  If it is doubtful whether all safety devices have been correctly installed and are functional, 

have a service centre check them. 

 

Pos: 18.6.39 /Ü berschriften/Ü berschriften 3/P-T/PPersönliche Schutzausr üstung en @ 453\mod_1464013064506_78.docx @ 3080269 @ 3 @ 1 

 

3.3.11 

Personal Protective Equipment 

Pos: 18.6.40 /BA/Sicherheit/1. Grundlegende Sicher heitshinweisePersönliche Schutzausrüstung en_fuer alle @ 494\mod_1488375125538_78.docx @ 3322625 @  @ 1 

 

The wearing of personal protective equipment is an important safety measure. Missing or 

unsuitable personal protective equipment increases health risks and injuries. 

Personal protective equipment is for example: 
–  Suitable protective gloves 
–  Safety boots 
–  Tight-fitting protective clothing 
–  Hearing protection 
–  Protective goggles 
•  Specify and provide personal protective equipment for the particular job. 
•  Use only personal protective equipment which is in proper condition and offers effective 

protection. 

•  Adjust personal protective equipment to the person, for example the size. 
•  Remove unsuitable clothing and jewellery (e.g. rings, necklaces) and cover long hair with a 

hairnet. 

 

Pos: 18.6.41 /BA/Sicherheit/1. Grundlegende Sicher heitshinweise/Geeignete Klei dung tr agen @ 176\mod_1373011520074_78.docx @ 1508413 @  @ 1 

 

Wear suitable clothing 

Loose clothing increases the risk of it becoming caught or wrapped around rotating parts and of 

it becoming caught on protruding parts. As a result, people may be seriously injured or killed. 
•  Wear tight-fitting clothing. 
•  Never wear rings, chains or other items of jewellery. 
•  Cover long hair with a hairnet. 
•  Wear sturdy shoes or protective work boots. 
 

Pos: 18.6.42 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TC 1000





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands