Krone Swadro TC 1000 Operating Instructions Manual Download Page 31

Page: 31 / 132

Safety

Pos: 18.48.1 /Ü berschriften/Ü berschriften 2/P-T/S/Sicherheitsausstattung @ 17\mod_1236613960651_78.docx @ 205812 @ 2 @ 1

3.6

Safety Equipment

Pos: 18.48.2.1 /Ü berschriften/Ü berschriften 3/P-T/S/SM V-Kennzeichnungstafel @ 508\mod_1500894961101_78.docx @ 3490263 @ 3 @ 1

3.6.1

SMV Emblem

Pos: 18.48.2.2 /BA/Sicherheit/SMV- Kennzeichnung_für alle M aschinenSM V-Kennzeichungstafel _Bild @ 503\mod_1496825928811_78.docx @ 3460830 @ @ 1

Fig. 3

Pos: 18.48.2.3 /BA/Sicherheit/SMV- Kennzeichnung_für alle M aschinenSM V-Kennzeichungstafel _T ext_US @ 503\mod_1496826899491_78.docx @ 3460861 @ @ 1

The SMV emblem (Slow-Moving Vehicle) (1) is attached to slow-moving machines or vehicles

travelling on public highways at a speed less than 40 km/h (25 mph).
The SMV emblem (1) is at the rear in the centre or at the rear on left.

Pos: 18.48.2.4 /BA/Erstinbetriebnahme/SMV- Kennzei chnungstafel_Einl eitungssatz @ 485\mod_1479386282450_78.docx @ 3264355 @ @ 1

When driving the machine on public highways, the SMV emblem must be mounted.

Pos: 18.48.2.5 /BA/Sicherheit/SMV- Kennzeichnung_für alle M aschinenWenn di e M aschine auf Tr ansportfahrzeugen (z. B. LKW oder Bahn) befördert wird_Z usatzsatz_EU U SA @ 508\mod_1500636210416_78.docx @ 3489536 @ @ 1

If the machine is transported on transport vehicles (for example lorry or train), the SMV emblem

must be covered or dismounted.



Pos: 18.48.3 /Ü berschriften/Ü berschriften 3/P-T/S/Stützfuß @ 111\mod_1336986282572_78.docx @ 988583 @ 3 @ 1

3.6.2

Support Jack

Pos: 18.48.4 /BA/Sicherheit/Sicherheitsausstattung/Schwader/Stützfuß _Bil d_Swadr o TC 930 @ 510 \mod_1501674990345_78.docx @ 3497450 @ @ 1

TC930009

Fig. 4

Pos: 18.48.5 /BA/Sicherheit/Sicherheitsausstattung/Schwader/Stützfuß _T ext @ 508\mod_1500889826209_78.docx @ 3490063 @ @ 1

The support jack (1) is designed for the stability of the machine when it is not connected to the

tractor.

Pos: 18.48.6 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Summary of Contents for Swadro TC 1000





































































































































Search results

Summary of Contents for Swadro TC 1000

Reviews:

Brands by name

Popular brands

Krone Swadro TC 1000, Operating Instructions Manual

Search results

Summary of Contents for Swadro TC 1000

Reviews:

Brands by name

Popular brands