manualshive.com logo in svg

Krone Swadro TC 1000, Operating Instructions Manual

Share
Download
Krone Swadro TC 1000 Operating Instructions Manual Download Page 27

 

Safety

 

27 

 

Pos: 18.15 /BA/Sicherheit/4. Sicher hei tsaufkl eber/U S - ANSI/27 002/27 002 054 0 (1x)  Order N o. -  Immer als ersten Sicherheitsaufkleber benutzen @ 248\mod_1396588865433_78.docx @ 1931710 @  @ 1 

 

1) Order No. 27 002 054 0 (1x) 

Pos: 18.16 /BA/Sicherheit/4. Sicher hei tsaufkl eber/U S - ANSI/27 002/27 002 054 0 Bil d/T ext @ 248\mod_1396588874605_78.docx @ 1931739 @  @ 1 

L

 

 

CAUTION

27  002  054  0

To avoid serious injury or death

- Read and unders tand operator´s  m anual  before operating equipm ent.

- Lower implement, stop tractor engine and remove key before

leav ing operator´s  platform .

- Keep all s hields  and guards  in place.

- Keep hands  feet and c lothing away  from  m ov ing parts .

- Keep riders  off the m ac hine.

- Make certain every one is clear of the machine before starting

trac tor engine and s tarting.

- Do not allow unqualified operator to run equipm ent.

- Do not operate equipm ent in trans port pos ition.

- Never lubricatem, adjust, unclog or service the equipment with

trac tor engine is  running.

- Wait for all movement to stop before opening shield or servicing

m ac hine.

- Nev er work  underneath equipm ent without s ec urely  s upporting.

 

CAUTION 

To avoid serious injury or death. 

-  Read and understand operator´s manual before operating 

equipment. 

-  Lower implement, stop tractor engine and remove key before 

leaving operator´s platform. 

-  Keep all shields and guards in place. 
-  Keep hands, feet and clothing away from moving parts. 
-  Keep riders off the machine. 
-  Make certain everyone is clear of the machine before starting 

tractor engine and starting. 

-  Do not allow unqualified operator to run equipment. 
-  Do not operate equipment in transport position. 
-  Never lubricate, adjust, unclog or service the equipment with 

tractor engine is running. 

-  Wait for all movement to stop before opening shield or 

servicing machine. 

-  Never work underneath equipment without securely 

supporting. 

 

Pos: 18.17 /BA/Sicherheit/4. Sicher hei tsaufkl eber/U S - ANSI/27 004/27 004 600 0 (1x)  Order N o. @ 283\mod_1407735841401_78.docx @ 2243228 @  @ 1 

 

2) Order No. 27 004 600 0 (1x) 

Pos: 18.18 /BA/Sicherheit/4. Sicher hei tsaufkl eber/U S - ANSI/27 004/27 004 600 0 Bil d/T ext @ 283\mod_1407734745736_78.docx @ 2243187 @  @ 1 

L

 

 

CAUTION

Max. PTO speed

540 RPM

27 004 600 0

 

CAUTION 

Max. PTO speed 540 RPM. 

 

Pos: 18.19 /BA/Sicherheit/4. Sicher hei tsaufkl eber/U S - ANSI/27 004/27 004 598 0 (1x)  Order N o. @ 277\mod_1404812270174_78.docx @ 2077956 @  @ 1 

 

3) Order No. 27 004 598 0 (1x) 

Pos: 18.20 /BA/Sicherheit/4. Sicher hei tsaufkl eber/U S - ANSI/27 004/27 004 598 0 Bil d/T ext @ 277\mod_1404812294329_78.docx @ 2078014 @  @ 1 

L

 

 

CAUTION

27 004 598 0

The operating pressure

of the hydraulic system

must not exceed

200 ba r.

 

CAUTION 

The operating pressure of the hydraulic system must not exceed 

200 bar. 

 

Pos: 18.21 /BA/Sicherheit/4. Sicher hei tsaufkl eber/U S - ANSI/27 010/27 010 984 0 (2x)  Order N o. @ 283\mod_1407736310140_78.docx @ 2243322 @  @ 1 

 

4) Order No. 27 010 984 0 (2x) 

Pos: 18.22 /BA/Sicherheit/4. Sicher hei tsaufkl eber/U S - ANSI/27 010/27 010 984 0 Bil d/T ext @ 283\mod_1407736295974_78.docx @ 2243291 @  @ 1 

L

 

 

Warning

27  010  984  0

To avoid possible injury.

Before s tarting work , m ov e the

hoop guards  to the pro tec tiv e

pos ition (fold down).

 

WARNING 

To avoid possible injury. 

Before starting work, move the hoop guards to the protective 

position (fold down). 

 

Pos: 18.23 /BA/Sicherheit/4. Sicher hei tsaufkl eber/U S - ANSI/27 009/27 009 598 0 (4x)  Order N o. @ 283\mod_1407738118304_78.docx @ 2243873 @  @ 1 

 

5) Order No. 27 009 598 0 (4x) 

Pos: 18.24 /BA/Sicherheit/4. Sicher hei tsaufkl eber/U S - ANSI/27 009/27 009 598 0 Bil d/T ext @ 283\mod_1407738131002_78.docx @ 2243904 @  @ 1 

L

 

 

Warning

27 009 598 0

Danger in the 

slewing range.

Keep distance while the

machine is operating!

 

WARNING 

Danger in the slewing range. 

Keep distance while the machine is operating! 

 

Pos: 18.25 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TC 1000





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands