Krone LOAD CARRIER Operating Instructions Manual Download

Page: 47 / 128

RUNNING GEAR OPERATION

Operating instructions • Load Carrier • 505410638-02 • 07/2019

Folding up the side collision protection

► Pull out the spring pin on both plug-in

bolts.

► Pull out the plug-in bolts.

► Fold up the side collision protection.

► Insert the plug-in bolts into the drilled

holes.

► Secure the plug-in bolts with the spring

pins.

The side collision protection is folded
up and secured.

Folding down the side collision protec-
tion

► Pull out the spring pin on both plug-in

bolts.

► Pull out the plug-in bolts.

► Fold down the side collision protection.

► Insert the plug-in bolts into the drilled

holes.

► Secure the plug-in bolts with the spring

pins.

The side collision protection is folded
down and secured.

5.15

Spare wheel bracket

WARNING

Risk of accident from an unsecured
spare wheel!

An unsecured spare wheel can fall off
when driving and cause serious accidents.

► Properly secure the spare wheel.

► Only transport wheels that are de-

signed for the spare wheel bracket.

► Check the spare wheel bracket for

damage.

► Immediately repair the spare wheel

bracket if defective.

CAUTION

Risk of injury due to a falling spare
wheel!

The weight of a falling spare wheel can
cause injuries.

► Work carefully when changing a spare

wheel.

KRONE trailers can be equipped with a
spare wheel bracket. Depending on the
equipment, the following versions are pos-
sible:

○

Spare wheel with basket storage

(see

"5.15.1 Spare wheel with basket storage",
pg. 47)

○

Spare wheel with winch

(see "5.15.2

Spare wheel with winch", pg. 48)

○

Spare wheel in the pallet storage box

(see "5.15.3 Spare wheel in the pallet stor-
age box", pg. 49)

○

Spare wheel for twin and tractor
vehicle tyres

(see "5.15.4 Spare wheel for

twin and tractor vehicle tyres", pg. 49)

5.15.1

Spare wheel with basket stor-
age

Fig. 5-36:

Spare wheel with basket storage
version 1

Storage basket

Rim holder

Securing device

Summary of Contents for LOAD CARRIER

































































































































Search results

Summary of Contents for LOAD CARRIER

Reviews:

Related manuals for LOAD CARRIER

Brands by name

Popular brands

Krone LOAD CARRIER, Operating Instructions Manual

Search results

Summary of Contents for LOAD CARRIER

Reviews:

Related manuals for LOAD CARRIER

Brands by name

Popular brands