22
Adjustments
3.4 Edge spreading mechanism
1
KW-0-035
Adjusting the edge spread mechanism
•
Lower the chassis to remove the load from the
tandem axle (see chapter “Transport position”)
•
Close the control valve (2)
•
Open the control valve (3)
•
Actuate the control valve on the tractor
•
Read off the setting on the indicator
•
Close the control valve (3)
•
Open the control valve (2)
3.5 Tine adjustment
The tines (3) should be set vertically to the ground.
For adjustment release securing bolt (1) and turn
eccentric (2) to the next position. Tighten the
adjustment screw to a torque setting of 95 Nm.
The current position of the undercarriage wheels can
be read from the indicator (1). It is located to the right
(in direction of movement) of the carrier bar.
2
KWT-0-023
3
KW-1-058
1
3
90
°
2