12
Putting the machine into operation
CAUTION: Lower link arms (2) on the tractor
should be the same height. Secure the lower link
arms from moving sideways using braces or
chains (1).
Mounting the PTO shaft on the rotary tedder
Slide on the PTO shaft (3) with wide-angle connecting
piece (2) to the PTO shaft stub (1) of the rotary tedder.
2.2 Attachment to the tractor
•
Couple the lower link arms (3) to the rotary tedder
•
Raise the lower link arms slightly
•
Pull out the spring pin (1)
•
Remove the support (2)
•
Move the jack stand (4) back
•
Secure the actuating cable on the transport locking
device to the tractor
KWT-0-005
2
1
3
4
KWT-0-001
2
1
KWT-0-004
1
2
3
Observe the marking (arrow and tractor) on the
PTO shaft.
NOTE
No-one should be standing between the
tractor and the machine during
attachment.