34
7.4 Fixed lighting
The cables of the lighting system should be routed
along the protective frame to a point below the carrier
bar (1). Fix the cable to the frame with cable ties. The
bracket for the plug connector between the tractor and
the light connection cable should be mounted to the
carrier bar (4). Connect the plug-in connectors and
screw the connectors to the retaining panel. Check that
the lighting system works. The cables should also be
secured to the carrier bar with cable ties at the holes (3)
provided. The illustration shows the carrier bar as seen
from below.
A permanently fixed lighting system can be mounted on
all rotary tedders. To fit the system, unscrew the brack-
ets for fitting the removeable lights on the warning signs
(1). In the middle of the square warning signs and at the
lower end of the oblong warning signs there is a hole
(3) through which the supply cable to the lamps (2) can
be passed. Next to this hole are two further holes which
can be used for screwing the lights in place. Screw
back lights (4) onto the rear warning signs as shown in
the illustration.
KW-0-005
1
1
3
2
4
3
3
2
1
4
KW-0-034
Summary of Contents for KW 6.60/4x7
Page 45: ...43 ...