31
The PTO shaft stup (1) is designed for spreading and
tedding. To lay night swathes, push the PTO shaft onto
stup (2).
As the swathes are deposited by the
same swather discs that are used for
tedding, ideal spreading is assured after
the swathing process.
•
For all care, maintenance, repair
and assembly work on the rotary
tedder, always switch off the PTO
shaft.
•
Switch off the engine and remove
the ignition key.
•
Protect the tractor and rotary
tedder from rolling!
7.2 Additional tine loss safety mechanism
It is essential to place a protective cover
on the free PTO stup shaft.
Apart from the standard tine loss safety mechanism(5),
it is possible to fit an additional tine securing
mechanism. Per tine, it consists of:
- one cable
- two cable clamps, each with
- two flat round washers and safety washers
Fit the cable (4) with the cable clamps (3) to the
swather tines (1). Seen in the direction of rotation, the
cable must be behind the swather tine. The nuts (2) of
the cable clamps must face outwards.
KW-0-030
1
2
KW-1-020
1
3
2
4
5
Summary of Contents for KW 6.60/4x7
Page 45: ...43 ...