19
Switch off the engine and remove the
ignition key. Protect the tractor from
rolling. Only then pull off the PTO shaft.
The holding chains of the protective
tubes are not designed or suitable for
holding up the PTO shaft.
Loosen the holding chain, pull off the PTO shaft and lay
it on the PTO shaft support bracket (1).
• Pull off the hydraulic hose (2). (one hydraulic hose
for KW 5.50/4x7, KW 6.70/6 and KW 7.70/6x7; two
hydraulic hoses for KW 8.80/8)
• Take the hydraulic switchover valve (1) from the
bracket on the tractor and place it in the
corresponding bracket (4) on the rotary tedder.
• Insert the coupling of the hydraulic hose into the
bracket (3) on the three-point frame.
• Disconnect the control cable (for kW 5.50/4x/, KW
6.70/6 and KW 7.70/6x7) and the electrical lighting
cable from the tractor and place them on the rotary
tedder.
• Remove the upper and lower link arms.
Depressurize the hydraulic system
before pulling off the hydraulic hoses.
KW-0-010
1
2
3
4
KW-4-007
1
Summary of Contents for KW 6.60/4x7
Page 45: ...43 ...