22
3.6 Stabilizers
For rotary tedders with a large working width, the
machine could start to wobble on uneven ground. A
greater pre-tensioning of the stabilizers can suppress
this effect. To achieve this, tighten the screws (1) of the
friction plates (2) on the stabilizer tubes (3).
Do not tighten the friction plates too
tightly, or the stabilizers may lock!
3.5 Edge spreading mechanism
To adjust the edge spreading mechanism, raise the
rotary tredder. Switch the hydraulic switchover valve (1)
to position "b" (edge spreading mechanism). The edge
spreading mechanism can be adjusted from the control
valve on the tractor. The setting of the undercarriage
wheels can be seen on the pointer.
The undercarriage wheel setting can be seen on the
pointer (1). It is situated to the right of the carrier bar in
forward direction.
1
KW-0-035
KW-0-026
2
3
1
KW-0-048
1
b
a
Summary of Contents for KW 6.60/4x7
Page 45: ...43 ...