Krone KW 6.60/4x7, Operating Instructions Manual, Page: 19 / 46

17
• Make sure that no persons are in the
swivel area of the outer swather
discs.
• Before driving on public roads,
attach all protective devices,
warning signs and lights, check
them and make sure that they work.
2.7 Conversion from working to
transport position
The PTO shaft must be switched off
before the outer swather discs are lifted
into transport position.
Set edge spreading mechanism to
central position.
Select position a "Raise/lower outer swather discs"
on the switchover valve (1). Lift the outer swather discs
by operating the tractor hydraulic system.
KW 5.50/4x7; KW 6.70/6 and KW 7.70/6x7
Raise the outer swather discs until the locking devices
(1) have fully clicked into place.
Before raising the rear hydraulics, check
that the rear window of the tractor cabin
is closed. Otherwise, the protective
frame could cause damage.
KW-0-049
2
1
b
a
KW-0-051
1
KW-4-001
1
Attach the lighting system. Check that the lights work.
KW 8.80/8
Lift outer swather disks until the cylinders have travelled
completely inward. Close shut-off valve (1).
The swather disk arms are secured in
transport position with hydraulic stop
valves on the hydraulic cylinders. In cases
of transport journeys, the shut-off valve (1)
must be closed and the tractor operation
valve must be blocked!
Be sure that the transport locking device
has correctly engaged and that the
control cable is not taut.