Krone KW 6.60/4x7, Operating Instructions Manual, Page: 16 / 46

14
Jack stand
Jack stand at front
Therotary tedders is fitted with a jack stand that folds
away to the rear (1). The jack stand is folded away in
working position. To do this, lift the rotary tedder slightly
and remove the linch pin (2). Fold the jack up to
position "3" and secure it with a linch pin (2).
Jack stand at rear
The rotary tedders KW 460, KW 550, KW 670 and KW
770 are fitted with a jack stand (2) at the rear. In
working position, fold up the jack stand and secure it in
position "3" with a linch pin (1).
Before raising the rear hydraulics, make
sure that the rear window of the tractor
cabin is closed. Otherwise, the
protective frame of the rotary tedder
could cause damage.
KW-0-016
2
3
1
KW-0-053
2
1
3
KW 8.80/8
KW-4-001
1
The swather disk arms are secured in
transport position with hydraulic stop
valves on the hydraulic cylinders. In cases
of transport journeys, the shut-off valve (1)
must be closed and the tractor control
valve must be locked!
KW-0-011
The rear jack stand (2) mainly prevents
the rotary tedder from tipping over
backwards when it is stopped while in
operating position. - Danger of
accident!