Krone KW 6.60/4x7, Operating Instructions Manual, Page: 18 / 46

16
KW 5.50/4x7; KW 6.70/6 and KW 7.70/6x7
Activate the single action control valve on the tractor
and pressurize the hydraulic cylinder. This relieves the
pressure on the locking device (2). Pull the control
cable (1) to release the locking device (2). Keep the
cable taut. Slowly lower the outer swather discs with the
control valve until the wheels rest on the ground.
Only for KW 7.70/6x7 and KW 8.80/8
Move the undercarriage wheel (2) on the second
swather disk forward into working position. Secure with
the bolt (1) and linch pin.
NOTE:
Observe the position of the individual wheels when
lowering into working position. (see chapter
"Adjusting the swather disk spreading angle")
2.6 Converting from transport to
working position
When the outer swather discs are being
lowered, no persons may be allowed to
enter the swivel area of the outer swather
discs.
KWT-0-014
2
1
KW-0-012
1
2
KW-4-001
1
Select the position "Lower/raise outer swather discs"
on the switchover valve.
When in use, leave the control valve in the
„Lower“ position.
KW 8.80/8
Open the shut-off valve (1) and actuate the double-
acting control valve on the tractor and slowly lower the
outer swather disks.
When in use, leave the control valve in the
„Float Position“.