Operation
230
Pos: 55.89.9 /WHB/Warnhinweise - Allgemeingültig/VORSICHT - Zurückschlagende Messer - nicht von Hand in Arbeitsposition, Hammer verwenden, @ 55\mod_1292578390301_78.docx @ 521706 @ @ 1
CAUTION! - Blades fold back!
The blades are pre-tensioned via spring force. Risk of injury!
Never press the blades into working position manually.
•
Use a tool, for example a hammer.
•
Always wear protective gloves.
Pos: 55.89.10 /WHB/Warnhinweise - Allgemeingültig/VORSICHT - Verletzungsgefahr am Messer im Messerbalken - Schutzhandschuhe tragen @ 55\mod_1292496039379_78.docx @ 520211 @ @ 1
Caution! - Risk of injury
Risk of injury on the blade in the blade bar!
•
Always wear protective gloves.
Pos: 55.89.11 /BA/Einstellungen/Schneidwerk/Schnittlänge einstellen/Schnittlänge Messer Bild @ 67\mod_1302528326300_78.docx @ 617569 @ @ 1
A
B
RPN00020_2
Abb. 168
Pos: 55.89.12 /BA/Einstellungen/Schneidwerk/Messer zuschalten CF/CV @ 67\mod_1302529148221_78.docx @ 617597 @ @ 1
After turning on the blades, always check to see whether all the cutters have swivelled up.
If this is not the case:
•
Move the blade control shafts (A/B) to the zero position of blades (turn both blade control
shafts (A/B) to position (-))
•
Lower the conveyor floor mechanically or hydraulically
•
Clean the cutter base and especially the cutter slots thoroughly
After cleaning:
•
Set the desired chop length
After the blade control shafts (A/B) have been adjusted, the cutters automatically swivel back up
into working position.
If they have not, lightly tap any blades that have not already swivelled up with a tool (for
example a hammer) striking the back of the cutters to move them back to working position.
•
Raise the cutter base.
Pos: 55.89.13 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
Summary of Contents for Comprima CF 155 XC
Page 383: ......
