KRONE ISOBUS Terminal
152
Pos: 48.120 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Press-Wickelvorrichtung/Hauptmenüs/Hauptmenü 3 Handbedienung/Schwenktisch manuell verfahren @ 53\mod_1289980628828_78.docx @ 507209 @ 33 @ 1
8.10.7
Move swivel table by hand
• Softkey
moves the swivel table forward as long as the softkey is activated or until the
forward end position is reached.
• Softkey
moves the swivel table back as long as the softkey is activated or until the
rear end position is reached.
• Press
softkey
0
and hold it down until swivel table has reached the zero position.
•
Pressing the function key
closes the called up menu.
•
Pressing the function key
and holding it down brings up the basic screen.
Possible status messages window 1 (wrapping arms/swivel table); see chapter “Status
messages”.
Pos: 48.121 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Press-Wickelvorrichtung/Hauptmenüs/Hauptmenü 3 Handbedienung/Menü 3-2 Handbedienung Wickler @ 53\mod_1289982052609_78.docx @ 507235 @ 22 @ 1
8.11
Menu 3-2 Manual operation
wrapper
4
3
1
2
Fig. 114
Calling the menu
Menu 3-1 "Manual operation wrapper" is called.
•
Activate the key
1/2
to change to menu 3-2 "Manual operation wrapper"
2/2
.
Show in the display
(1)
= Display wrapping arm
(2)
= Display net motor
(3)
= Bale chamber and lifter display
(4)
= Holding arms display
Possible status messages window 3 (bale chamber); see chapter “Status messages”.
Pos: 48.122 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
Summary of Contents for Comprima CF 155 XC
Page 383: ......
