manualshive.com logo in svg

Krone Coil Liner, Operating Instructions Manual

The Krone Coil Liner Operating Instructions Manual is a comprehensive guide on how to effectively operate and maintain your Krone Coil Liner. This manual is available for free download on our website, ensuring easy access for users. Get all the information you need to make the most of your Krone Coil Liner today.

Share
Download
background image

SUPERSTRUCTURE OPERATION

Operating instructions • Semitrailer • 505369471-04 • 02/2019

115

1

Fig. 6-97:

Tension ratchet

► Release the side curtain.

► Fold up the side curtain and position

the straps on the inside.

► Place all four retainer levers in the

“Plateau” position. In the “Superstruc-
ture” position, the retainer levers pre-
vent the side curtain from creasing.

1

Fig. 6-98:

Retainer lever closed

► Lift all the locks of the roof bow.

1

Fig. 6-99:

Lock for roof bow

► Open the rear doors.

► Fold down the rear beam.

1

Fig. 6-100:

Rear beam

► Close the rear doors.

► Move the locking handle on the rear

gantry down, thereby unlocking the
rear gantry.

1

2

Fig. 6-101:

Unlocking the rear gantry

1

Rear gantry

2

Locking handle

► Push the superstructure to the front. At

the same time, push the roof bow in-
wards.

► Slide the rear gantry with the folded

curtain toward the front wall.

► Insert three plug-in posts as door pro-

tection posts.

► Tension the side curtain with the ten-

sion ratchet at the front.

Summary of Contents for Coil Liner

































































































































































































Reviews:

No comments

Related manuals for Coil Liner

Baja motorsports Trax Owner'S Manual preview
Trax
Brand: Baja motorsports Pages: 50
Club Car 2007 XRT 800 Maintenance Service Manual preview
2007 XRT 800
Brand: Club Car Pages: 516
Polaris YOUTH ATV 2001 Owner'S Safety And Maintenance Manual preview
YOUTH ATV 2001
Brand: Polaris Pages: 215
Club Car DS Gold Standard Owner'S Manual preview
DS Gold Standard
Brand: Club Car Pages: 64
RIDGID AC9946 Operator'S Manual preview
AC9946
Brand: RIDGID Pages: 40
Can-Am MAVERICK Sport MAX 1000R Operator'S Manual preview
MAVERICK Sport MAX 1000R
Brand: Can-Am Pages: 187
TRILECTRON 90T400SLN Operator preview
90T400SLN
Brand: TRILECTRON Pages: 7
Can-Am Maverick Operator'S Manual preview
Maverick
Brand: Can-Am Pages: 147
Hsun HS700UTV Maintenance Handbook preview
HS700UTV
Brand: Hsun Pages: 150
Federal Signal Corporation LEACH 2R-III Service Manual preview
LEACH 2R-III
Brand: Federal Signal Corporation Pages: 140
E-TON Viper 70 Owner'S Manual preview
Viper 70
Brand: E-TON Pages: 38
E-Z-GO ST 480 2007 Owner'S Manual And Service Manual preview
ST 480 2007
Brand: E-Z-GO Pages: 134
Mahindra ROXOR Operator'S Manual preview
ROXOR
Brand: Mahindra Pages: 100
Cold Jet Aero 40 HP Operator'S Manual preview
Aero 40 HP
Brand: Cold Jet Pages: 31
Yamaha BIGBEAR YFM400NM Owner'S Manual preview
BIGBEAR YFM400NM
Brand: Yamaha Pages: 162
Yamaha YDRE Owner'S Manual preview
YDRE
Brand: Yamaha Pages: 46
Bosski 800 UT-X Owner'S Manual & Assembly Instructions preview
800 UT-X
Brand: Bosski Pages: 12
Arctic Cat 2016 Wildcat Sport Service Manual preview
2016 Wildcat Sport
Brand: Arctic Cat Pages: 168

Brands by name

Popular brands

Load more brands