Krone Coil Liner Operating Instructions Manual Download

Page: 15 / 192

SAFETY

Operating instructions • Semitrailer • 505369471-04 • 02/2019

Sign

Attachment point/meaning

Warning sign, risk of crushing, lift axle

Attachment point: In the axle area on both sides of the
vehicle, on the axle body.

max. xxxx kg!

Warning sign, floor load (max. 5460/7000/8000/9000 kg)

Attachment point: Inside on the right rear door

Warning sign, tilt stability (rear area of the trailer)

Attachment point: Inside on the right rear door

Warning sign, tilt stability (front area of the trailer)

Attachment point: Inside on the right rear door

2.7

Danger areas

On and around the trailer there are areas
with an increased danger to your safety or
to the safety of other persons. Ensure ad-
equate lighting when performing any work
in hazard areas.

Summary of Contents for Coil Liner

































































































































































































Search results

Summary of Contents for Coil Liner

Reviews:

Related manuals for Coil Liner

Brands by name

Popular brands

Krone Coil Liner, Operating Instructions Manual

Search results

Summary of Contents for Coil Liner

Reviews:

Related manuals for Coil Liner

Brands by name

Popular brands