SUPERSTRUCTURE OPERATION
Operating instructions • Semitrailer • 505369471-04 • 02/2019
91
1
2
Fig. 6-49:
Switch in the “hand” position
1
Front wall
2
Switch in the "hand” position
► Turn the switch to the "hand" position.
► Move the curtain hooks into position by
hand.
► Turn the switch to the "close" position
Fig. 6-50:
The tension cable is tensioned
ü
The EasyTarp curtain tensioning
device is tensioned and locked.
Re-tightening the EasyTarp curtain ten-
sion cable
If the tension subsides, the EasyTrap cur-
tain tension cable can be re-tightened.
Depending on the version, KRONE trailers
may be equipped with the following to re-
tighten the EasyTarp curtain tension cable
○
a threaded rod, or
○
a grid.
Re-tightening the EasyTarp curtain with
a threaded rod
þ
The EasyTarp curtain tensioning
device is opened.
2
4
1
3
Fig. 6-51:
Curtain tensioning device with
threaded rod
1
Tension cable
2
Nuts
3
Threaded rod
4
Curtain tensioning device
► Release both nuts at the rear in the
direction of travel.
► Turn the nut at the front in the direction
of travel until the curtain tensioning
device tightens the tension cable.
► Bolt on the curtain tensioning device
again with the nuts.
ü
The EasyTarp curtain is re-tightened.