LOADING AND SECURING
136
Operating instructions • Semitrailer • 505369471-04 • 02/2019
Releasing the lashing belt
► Fold the locking lever on the lashing
strap winch towards the rear.
► Unthread and remove the lashing belt
from the lashing belt bracket on the
other side of the vehicle.
► Remove the lashing belt from the load.
► Roll up the lashing belt.
► Fold the locking lever on the lashing
strap winch towards the front.
ü
The lashing belt is released.
8.3
Ensuring form-fitting
NOTE
Material damage caused by empty
spaces in the cargo area!
Empty spaces between parts of the cargo
can result in material damage to the load
while driving.
► Eliminate any empty space towards
the cargo space limiters.
► Eliminate any empty space between
individual pieces of cargo.
► Comply with the permissible axle load
when eliminating empty spaces.
► Fill empty spaces for example with
wooden pallets, storage pads or air
cushions.
► Fill stowage gaps in the middle with
packs of wood chip for example.
► Secure the load, e.g. by lashing it
down.
Flush loading and form-fitting makes load
securing easier. Form-fitting load securing
means that the load fills the space between
the load compartment limiters at the front,
side, and rear wall.
Furthermore, the load can be supported by
pallet stop edges, locking beams
Using the Multi Block system", pg. 140)
or parti-
(see "8.9.6 Using the Multi Wall sys-
. Partition wall locks can help
create a positive-locking fit with the outside
of the vehicle.
8.4
Securing pallets with hoop
casings and shrink-wrap
Fastening hoops and plastic foil shrink-
wrap of load items placed on pallets are
not intended for load securing. They only
fasten the load onto or with the pallet.
► Secure the load with hoop casings and
shrink-wrap on pallets against sliding,
e.g. by lashing it down
8.5
Load securing rail
KRONE trailers can be equipped with load
securing rails.
Load securing rails are used to attach ten-
sion straps, telescopic lock rods and tele-
scopic lock bars.
1
2
Fig. 8-5:
Load securing rails with telescopic
lock bars
1
Load securing rail
2
Telescopic lock bars
8.6
Securing the load with tele-
scopic lock rods
KRONE trailers with board walls are
equipped with anchor rails for load secur-
ing as an option.
The load is secured against sliding with
telescopic lock rods. The telescopic lock
rods are equipped with spring-loaded slid-
ing blocks and are attached at the required
location on the load securing rails
.