3
INSTALLATION
14
OPTITEMP TT 53 C/R
www.krohne.com
06/2018 - 4006523501 - MA OPTITEMP TT 53 R01 en
3.2 Rail mounting kit for in-head transmitters
The screws in the kit is not to be used with this transmitter.
1
Place the transmitter on the clip.
2
Press down the transmitter until it is attached to the clip.
INFORMATION!
The rail mounting kit allows to install the in-head transmitter on a rail according to EN 60715 /
DIN 50022.
The kit does not belong to the standard scope of delivery. You have to order it separately.
Rail mounting kit for in-head transmitters
Figure 3-2: Rail mounting kit for in-head transmitters
1
Rail (not included in the kit)
2
Screws (not needed)
3
Clip
4
Transmitter
Installation procedure: Step 1
