3
INSTALLATION
12
BW25
www.krohne.com
10/2008 • 4000432301 MA BW25 R01 en
Installation
3.1 Notes on installation
3.2 Storage
•
Store the device in a dry and dust-free location.
•
Avoid lasting direct exposure to the sun.
•
Store the device in its original packaging.
•
The permissible storage temperature is from -40 to +80
°
C for standard meters.
3.3 Installation conditions
NOTE!
Inspect the cartons carefully for damage or signs of rough handling. Report damage to the
carrier and to your local office.
NOTE!
Check the packing list to make sure that you have received your complete order.
NOTE!
Please check on the device nameplates, that the device is supplied according to your order.
Check for the correct mains voltage printed on the nameplate. If not, contact your local
representative for advice.
CAUTION!
When installing the device, the following points must be observed:
•
Before installation, compare the serial number of the indicator (nameplate) with the serial
number on the displacement rod, the flange and the magnet.
•
In the case of level meters with a bypass chamber, the BW25 serial number on the bypass
chamber should be compared with the serial number on the indicator.
•
Avoid combining parts with differing serial numbers.
•
Ensure the material compatibility of the parts in contact with the product.
•
Screws, bolts and gaskets are to be provided by the customer and must be selected in
accordance with the pressure rating of the mounting flange or the operating pressure.
•
Align the gaskets. Tighten the nuts with the tightening torques of the appropriate pressure
rating.
•
Do not lay signal cables directly next to cables for the power supply.
MA_BW25_R01_en_PRT.book Page 12 Thursday, October 30, 2008 3:49 PM
