Krautzberger 200-0148, Operating Instructions Manual

Page: 34 / 49

8.6 Changing the seals
Removing the needle seals
1. Clean automatic spray gun (
Ä
Chapter 8.3 ‘Cleaning the automatic spray gun’
on page 29 ).
2. Remove the fluid needle (
Ä
Chapter 8.5 ‘Changing the fluid needle’ on page 31 )
Fig. 14: Removing needle packing
3. Unscrew the screw ( Fig. 14/2) from the head section ( Fig. 14/1) and the main element (
Fig. 143).
4. Remove the head section ( Fig. 14/1) from the main element ( Fig. 14/3).
Fig. 15: Removing needle packing
5. Unscrew the seal screw ( Fig. 15/3).
6. Remove all of the needle packing ( Fig. 15/4) from the head section ( Fig. 15/5).
7. Remove the seals ( Fig. 15/2) from the centring tubes ( Fig. 15/1).
Operating instructions
T-Dok-040-GB-Rev.5
mail@krautzberger.com, www.krautzberger.com GB–34