8 Maintenance
8.1 Safety
Personnel:
n
Specialised personnel
Protective equipment:
The selection of the protective equipment depends on the maintenance conditions on site and the
medium utilized by the system owner. The applicable country-specific safety, accident prevention,
occupational safety, and environmental protection regulations must adhered to for the proper
selection of the protective equipment and the information given by the spray fluid manufacturer on
the safety data sheet must be taken into consideration.
WARNING!
Risk of injury through the use of incorrect spare parts!
The use of incorrect or defective spare parts can cause hazards for the personnel as well as
damage, malfunctions or complete failure.
–
Only use OEM parts from Krautzberger or Krautzberger-approved spare parts.
–
In case of questions, always contact our Customer Care department.
CAUTION!
Risk of injury through compressed air!
Uncontrolled leaks of compressed air can lead to serious injuries!
–
Prior to any work on the device, all compressed-air lines must be closed and bleed if nec-
essary.
Hose and pipelines
Even with intended use by environmental influences, the service life of hose lines and pipe-
lines is limited. For the sake of prevention, all hose and pipelines should be replaced regularly
according to their load.
8.2 Maintenance schedule
The following sections describe the maintenance work that is required for optimal and fault-free
operation of the automatic spray gun. Check wearing parts such as seals, nozzles and needles at
regular intervals. The level of wear depends on the abrasiveness of the spray fluid used. Escaping
air and spray fluid as well as the deterioration of the spray pattern are signs that parts are worn.
Contact Krautzberger Customer Care with any questions on maintenance work and maintenance
intervals.
Automatic spray gun A 10
ENGLISH
■
200-0148
GB–27
Summary of Contents for 200-0148
Page 48: ......
