6.5 Connecting the automatic spray gun
See also (
Chapter 6.4 ‘Connection scheme’ on page 18
WARNING!
Danger of injury due to improper connection!
When the material supply is pressurised, e.g. from pressure containers or with pumps, the
range of the fluid jet can increase by a multiple in case of atomiser air failure. This presents a
hazard to people and property.
–
Make sure that the material supply and the control air are interrupted if the atomiser air
pressure drops off quickly.
–
It is recommended to regulate the atomiser air pressure via a filter pressure reducer.
The connections for control air and atomiser air are marked with letter abbreviations.
Fig. 4: Connecting the automatic spray gun
1.
Connect the control air to input "St" ( Fig. 4/1).
2.
Connect the atomiser air to input "Z" ( Fig. 4/2).
3.
Connect the fluid line to ( Fig. 4/3).
Automatic spray gun A 10
ENGLISH
■
200-0148
GB–19
Summary of Contents for 200-0148
Page 48: ......
