background image

KRAMER:  SIMPLE CREATIVE TECHNOLOGY

 

Overview 

 

The 

WP-500

 

Consists of two VGA inputs, each with an unbalanced stereo audio signal, 
one composite video input with an unbalanced stereo audio signal, and a 
dynamic or condenser microphone input  

 

Includes an RGBHV output, a composite video output and two identical audio 
outputs 

 

Includes bidirectional RS-232 and IR out for controlling the display device 

 

Has two analog volume control adjustment knobs, one for the PC/Video audio 
signal and the other for microphone volume adjustment 

 

Features four dedicated front panel buttons, one for turning the projector 
ON/OFF and the other three for selecting which input to route to the 
projector. Each button can be programmed to perform command

 

macros  

 

Is Kramer Site-CTRL™ compatible

1

 

Includes an Ethernet port for remote control and management from the 
Kramer Site-CTRL™ software and for accessing the stored Web pages 

, for network remote control and 

management over the Ethernet port 

 

Can store EDID information and support EDID communication with the 
connected PC sources (the default EDID is uploaded upon delivery; a specific 
EDID can be uploaded by the user via the Kramer 

FC-200

 

XGA EDID 

Copier

2

 

Has a USB port for programming via a computer 

 

Is available as a 3 Gang wall plate for the USA 

To achieve the best performance: 

 

Use the dedicated Kramer 

WP-500

 installation cable. If this is not available, 

connect only good quality connection cables, thus avoiding interference, 
deterioration in signal quality due to poor matching, and elevated noise-levels 
(often associated with low quality cables) 

 

Avoid interference from neighboring electrical appliances and position your 
Kramer 

WP-500 

away from moisture, excessive sunlight and dust 

 

                                                       

 

1 Kramer Site-CTRL is a powerful A/V asset management tool. It offers real-time network monitoring and control of Kramer 

Master controllers installed at an A/V site and all the connected A/V equipment. The Kramer Site-CTRL downloadable 

version can monitor and control up to 100 Kramer Master controllers. For larger installations, a similar solution is also 

available 

2 You can download the up-to-date user manual from the Internet at this URL: 

http://www.kramerelectronics.com

 

Summary of Contents for WP-500















Reviews: