background image

KRAMER:  SIMPLE CREATIVE TECHNOLOGY

 

Technical Specifications 

 

10 

6  Technical Specifications 

Table 4

 lists the technical specifications: 

Table 4: Technical Specifications

1

INPUTS: 

 of the WP-500 

1 composite video (1Vpp/75

Ω) on an RCA connector

 

2 VGA (PC) on 15-pin HD connectors 
2 stereo analog audio on 3.5mm mini connectors 
1 unbalanced audio on 2 RCA connectors 
1 condenser/dynamic microphone on a 3.5mm mini connector 

OUTPUTS (on Terminal 
Block Connectors): 

1 VIDEO OUT 2-pin, 2 Audio OUT 3-pin unbalanced stereo audio, 1 VGA (PC) 
OUTPUT 10-pin 

PORTS: 

Ethernet, 1 IR out on terminal block connectors, 1 RS-232 on terminal block 
connectors, 1 USB connector  

DEFAULT IP ADDRESS  192.168.1.39 

SUPPORTED BAUD 
RATES FOR RS-232: 

1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 

DEFAULT EDID 
INFORMATION: 

Standard timings supported: 640x480px60Hz (IBM VGA), 640x480px67Hz 
(Apple Mac II), 640x480px72Hz (VESA), 640x480px75Hz (VESA), 
800x600px56Hz (VESA), 800x 600px60Hz (VESA), 800x600px72Hz (VESA), 
800x600px75Hz (VESA), 1024x768px60Hz

2

POWER SOURCE: 

 (VESA), 1024x768px70Hz (VESA), 

1024x768px75Hz (VESA), 1280x1024px75Hz (VESA), 1280x1024px60Hz 
(VESA STD), 1280x960px60Hz (VESA STD), 1400x1050px60Hz (VESA STD), 
1440x900px60Hz (VESA STD), 1600x1200px60Hz (VESA STD) 

12V DC, 180mA 

FUSE: 

500mA, FSMD 1812 

ADAPTER: 

12V, 5A 

DIMENSIONS: 

16.2cm x 3.4cm x 11.4cm (6.37" x 1.34" x 4.49", W, D, H) 

WEIGHT: 

0.14kg (0.31lbs) approx. 

ACCESSORIES: 

Power supply, screwdriver, Kramer K-Config Windows®-based configuration 
software 

OPTIONS: 

12V DC, 0.5A Power supply

3

 , USB cable 3' (0.91m)

4

 

, WP-500 Installation 

cable, 

FC-200

 

XGA EDID Copier

, Site-CTRL™ Management Tool Software  

 

 

                                                       

 

1 Specifications are subject to change without notice 

2 Native/preferred timing (4:3) 

3 Model number AD2512C, part number 2535-000251 

4 Part number C-UA/MUB-3 

Summary of Contents for WP-500















Reviews: