KRAMER: SIMPLE CREATIVE TECHNOLOGY
Default EDID
26
Switching Protocol
P2000 -> P3000
P3000 -> P2000
Command:
0x38, 0x80, 0x83, 0x81
Command:
#P2000<CR>
Ethernet
Default Settings
Reset Settings
IP Address: 192.168.1.39
Power cycle the unit while holding in the Factory Reset
button, located on the rear panel of the unit.
TCP Port #: 5000
UDP Port #: 50000
The Windows®-based Kramer control software
1
11 Default EDID
operates with protocol 2000. If
the
VS-88DTP
is set to protocol 3000, it is automatically switched to protocol
2000.
Each input on the
VS-88DTP
is loaded with a factory default EDID. The
EDID for each input can be changed independently by uploading an EDID
binary file to each input via the RS-232 port using Kramer EDID Sender
software
2
Monitor
.
Model name............... VS-88DTP
Manufacturer............. KRM
Plug and Play ID......... KRM0200
Serial number............ 1
Manufacture date......... 2006, ISO week 12
-------------------------
EDID revision............ 1.3
Input signal type........ Digital (DVI)
Color bit depth.......... Undefined
Display type............. RGB color
Screen size.............. 700 x 390 mm (31.5 in)
Power management......... Not supported
Extension blocs.......... None
-------------------------
DDC/CI................... n/a
Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2.20
Red chromaticity......... Rx 0.640 - Ry 0.341
Green chromaticity....... Gx 0.286 - Gy 0.610
Blue chromaticity........ Bx 0.146 - By 0.069
White point (default).... Wx 0.284 - Wy 0.293
Additional descriptors... None
Timing characteristics
Horizontal scan range.... 45-56kHz
Vertical scan range...... 86-83Hz
Video bandwidth.......... 560MHz
CVT standard............. Not supported
GTF standard............. Not supported
1 Download the latest software from our Web site at
http://www.kramerelectronics.com
2 Available for download from
http://www.kramerelectronics.com