KRAMER: SIMPLE CREATIVE TECHNOLOGY
Hex Codes for Serial Communication (Protocol 2000)
28
OUT 1
OUT 2
OUT 3
OUT 4
OUT 5
OUT 6
OUT 7
OUT 8
IN 4
#V 4>1 CR #V 4>2 CR #V 4>3 CR #V 4>4 CR #V 4>5 CR #V 4>6 CR #V 4>7 CR #V 4>8 CR
IN 5
#V 5>1 CR #V 5>2 CR #V 5>3 CR #V 5>4 CR #V 5>5 CR #V 5>6 CR #V 5>7 CR #V 5>8 CR
IN 6
#V 6>1 CR #V 6>2 CR #V 6>3 CR #V 6>4 CR #V 6>5 CR #V 6>6 CR #V 6>7 CR #V 6>8 CR
IN 7
#V 7>1 CR #V 7>2 CR #V 7>3 CR #V 7>4 CR #V 7>5 CR #V 7>6 CR #V 7>7 CR #V 7>8 CR
IN 8
#V 8>1 CR #V 8>2 CR #V 8>3 CR #V 8>4 CR #V 8>5 CR #V 8>6 CR #V 8>7 CR #V 8>8 CR
14 Hex Codes for Serial Communication (Protocol 2000)
The Hex codes listed in this section are used to set video channels for a
single machine (set as Machine 1) connected via either RS-232 or Ethernet.
Similar hex codes are used when the
VS-88DTP
is connected via RS-485
and the machine is set to number 2.
Table 7
lists the Hex codes that switch video channels:
Table 7: VS-88DTP Hex Codes for Switching via RS-232/RS-485
Switching Video Channels
OUT 1
OUT 2
OUT 3
OUT 4
OUT 5
OUT 6
OUT 7
OUT 8
IN 1
01 81 81 81 01 81 82 81 01 81 83 81 01 81 84 81 01 81 85 81 01 81 86 81 01 81 87 81 01 81 88 81
IN 2
01 82 81 81 01 82 82 81 01 82 83 81 01 82 84 81 01 82 85 81 01 82 86 81 01 82 87 81 01 82 88 81
IN 3
01 83 81 81 01 83 82 81 01 83 83 81 01 83 84 81 01 83 85 81 01 83 86 81 01 83 87 81 01 83 88 81
IN 4
01 84 81 81 01 84 82 81 01 84 83 81 01 84
81
84
01 84 85 81 01 84 86 81 01 84 87 81 01 84 88 81
IN 5
01 85 81 81 01 85 82 81 01 85 83 81 01 85 84 81 01 85 85 81 01 85 86 81 01 85 87 81 01 85 88 81
IN 6
01 86 81 81 01 86 82 81 01 86 83 81 01 86 84 81 01 86 85 81 01 86 86 81 01 86 87 81 01 86 88 81
IN 7
01 87 81 81 01 87 82 81 01 87 83 81 01 87 84 81 01 87 85 81 01 87 86 81 01 87 87 81 01 87 88 81
IN 8
01 88 81 81 01 88 82 81 01 88 83 81 01 88 84 81 01 88 85 81 01 88 86 81 01 88 87 81 01 88 88 81
15 Kramer Protocol
By default, the
VS-88DTP
is set to protocol 3000 (see
Section 15.2
) but is
also compatible with Kramer’s Protocol 2000
18F
1
(see
Section 15.3
).
Section 15.1
describes how to switch between protocol 3000 and protocol
2000.
15.1 Switching Protocols
You can switch protocols either via the front panel buttons (see
Section 15.1.1
) or the protocol commands.
15.1.1
47B
Switching Protocols via the Front Panel Buttons
To switch from protocol 3000 to protocol 2000, press and hold
19F
2
the OUT 1
and OUT 2 buttons for a few seconds.
1 You can download our user-friendly “Software for Calculating Hex Codes for Protocol 2000” from the technical support
section on our Web site at:
http://www.kramerelectronics.com
2 Not as part of a switching operation