![background image](http://html1.mh-extra.com/html/kramer/vs-88dtp/vs-88dtp_user-manual_2001432018.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VS-88DTP 8x8 DVI - Twisted Pair Matrix Switcher
14
Figure 8: Internet Protocol (TCP/IP) Properties Window
6.3.2 Connecting to the Ethernet Port via a Network Hub
You can connect the Ethernet port of the
VS-88DTP
to the Ethernet port on
a network hub or network router, via a straight through cable with RJ-45
connectors.
7 Operating the VS-88DTP 8x8 DVI - Twisted Pair Matrix
Switcher
This section describes how to:
•
Route inputs to outputs (see
Section
7.1
)
•
Disconnect outputs (see
Section
7.2
)
•
Store and recall a setup (see
Section
7.3
)
•
Acquire the EDID (see
Section
7.5
)
7.1 Routing Inputs to Outputs
To route an input to an output:
1. Press the required OUT key.
2. Press the required IN key.
The selected input is routed to the output.
To route one input to all outputs:
1. Press ALL.
2. Press the required IN button.
The selected input is routed to all outputs.
7.2 Disconnecting Outputs
To disconnect one output:
1. Press the required OUT button