Kramer Electronics Ltd.
VS-62H
– Defining the VS-62H 6x2 HDMI Matrix Switcher
6
VS-62H
.
Figure 2: VS-62H 6x2 HDMI Matrix Switcher Rear Panel
#
Feature
Function
1
REMOTE IR
Opening
Connect to an external IR receiver for controlling the device
via an IR remote controller (see
Covered by a cap. The 3.5mm mini jack at the end of the internal IR connection cable fits into this opening
2
REMOTE
INPUT To OUT 1
6-pin Terminal Block
Connect to up to six remote, contact-closure input selection
switches for Output 1 (see
Connecting the Remote Contact-
3
INPUT To OUT 2
6-pin Terminal Block
Connect to up to six remote, contact-closure input selection
switches for Output 2
4
RS-232
3-pin Terminal Block
Connect to a PC/serial controller (see
Controller to the VS-62H via RS-232
5
SETUP
8-way DIP-switch
Sets the device configuration (see
6
PROG VIA USB
Connector
Connect to a PC to upgrade the firmware (see
7
PROG VIA RS-232
Upgrade Switch
Depress to upgrade the firmware via the RS-232 port, release
for normal operation
8
ETHERNET
RJ-45 Connector
Connect to a PC via a LAN (see
9
RESET
Switch
Press while power-cycling the device to reset to factory
default parameters (see
10
5V DC
Connector
Connect to the power adapter, center pin positive
11
INPUT 1~6
HDMI Input Connectors
Connect to up to six HDMI sources (see
VS-62H 6x2 HDMI Matrix Switcher
12
OUT 1
and
OUT 2
HDMI Output
Connectors
Connect to up to two HDMI acceptors