![background image](http://html.mh-extra.com/html/kramer/vs-48hn/vs-48hn_user-manual_2001378034.webp)
VS-48HN - Protocol 3000
31
11.3
Kramer Protocol 3000
– Detailed Commands
This section describes the detailed commands list.
Command -
BUILD-DATE
Command Type - System-mandatory
Command Name
Permission
Transparency
Set:
-
-
-
Get:
BUILD-DATE?
End User
Public
Description
Syntax
Set:
Get device build date
#
BUILD-DATE
␍
Get:
-
-
Response
~nn@
BUILD-DATE
␠
date
␠
time
␍␊
Parameters
date
-
Format: YYYY/MM/DD where YYYY = Year, MM = Month, DD = Day
time
-
Format: hh:mm:ss where hh = hours, mm = minutes, ss = seconds
Command -
CPEDID
Command Type - System
Command Name
Permission
Transparency
Set:
CPEDID
End User
Public
Get:
-
-
-
Description
Syntax
Set:
Copy EDID data from the output to
the input EEPROM
#
CPEDID
␠
src_type, src_id, dst_type,
dest_bitmap
␍
Get:
-
-
Response
~nn@
CPEDID
␠
src_stg, src_id, dst_type, dest_bitmap
␍␊
Parameters
src_type - EDID
source type (usually output)
– 0=input, 1=output, 2=Default EDID
src_id
- number of chosen source stage (1.. max number of inputs/outputs)
dst_type - EDID destination
type (usually input) 0=input, 1=output, 2=Default EDID
dest_bitmap
-
bitmap representing destination IDs. Format: XXXX…X, where X is hex digit. The binary
form
of every hex digit represents corresponding destinations. Setting ‘1’ says that EDID data has to be
copied to this destination
Response Triggers
Response is sent to the com port from which the Set was received (before execution)
Notes
Destination bitmap size depends on device properties (for 64 inputs it is a 64-bit word)
Example: bitmap 0x0013 means inputs 1,2 and 5 are loaded with the new EDID