VS-48HN - Operating the VS-48HN 4x8 HDMI Matrix Switcher
15
To store a preset (for example, to preset 10):
1. Configure the switching as required for the preset.
2. Press the STO button.
The STO button flashes.
3. Select an OUT or IN SELECT button to store the device setting (for example,
IN 2 for preset 10).
4. Press the STO button to store the current setup.
If you do not press the STO button within 10 seconds the procedure automatically times
out.
To recall a preset (for example, preset 10):
1. Press the RCL button.
The RCL button flashes.
2. Press the relevant OUT or IN button that stored the preset (for example, IN
2/preset 10).
3. Press the RCL button to recall the stored preset.
The RCL button stops flashing.
6.4
Changing the Port Switching Speed
The switching speed can be set per port to any of the following:
3
—Normal (default)
2
—Fast
1
—Extra fast
To change the port switching speed
:
1. Ensure that the device is in normal switching mode, (that is, not Store, Recall
or EDID mode).