VS-48HN - Protocol 3000
27
11
Protocol 3000
By default, the
VS-48HN
is set to Protocol 2000 (see
Section
10
) but is also
compatible
with Kramer’s protocol 3000.
Note that the
VS-48HN
needs to be set to protocol 2000 in order to
use the IR remote control.
The
VS-48HN
can be operated using serial commands from a PC, remote
controller or touch screen using the Kramer Protocol 3000.
This section describes:
Kramer Protocol 3000 syntax (see
Section
11.1
)
Kramer Protocol 3000 commands (see
Section
11.2
)
11.1
Kramer Protocol 3000 Syntax
11.1.1
Host Message Format
Start
Address (optional)
Body
Delimiter
#
Destination_id
@
Message
CR
11.1.1.1 Simple Command
Command string with only one command without addressing:
Start
Body
Delimiter
#
Command
SP
Parameter_1,Parameter_2,…
CR
11.1.1.2 Command String
Formal syntax with commands concatenation and addressing:
Start
Address
Body
Delimiter
#
Destination_id
@
Command_1
Parameter1_1,Parameter1_2,…|
Command_2
Parameter2_1,Parameter2_2,…|
Command_3
Parameter3_1,Parameter3_2,…
|…
CR
11.1.2
Device Message Format
Start
Address (optional)
Body
delimiter
~
Sender_id
@
Message
CR
LF
i