Figure 1: VS-48HN 4x8 HDMI Matrix Switcher Front Panel
#
Feature
Function
1
IR
Indication LED
Lights yellow when receiving signals from the infrared remote control transmitter
2
IR
Receiver
Signal receiver for the infrared remote control transmitter
3
POWER
LED
Lights when the device is turned on
4
ALL
Button
Press followed by an input button to connect the selected input to all outputs
For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs
5
OFF
Button
Press after pressing an output button to disconnect the selected output from the
inputs. To disconnect all the outputs, press ALL followed by OFF
6
STO
Button
Press to store the current switching setting to a preset (see
Section
6.3
)
7
RCL
Button
Press to recall the current switching setting from a preset (see
Section
6.3
)
8
LOCK
Button
Press and hold to toggle the locking/release of the front panel buttons.
When storing or recalling presets, press to store or recall the preset (see
Section
6.3
)
9
EDID
Button
Press to capture the EDID (see
Section
6.2
)
10
SELECT
Buttons
IN
(1 to 4)
Press to select the input to switch after selecting an output (also used for storing
machine setups (see
Section
6.3
)
11
OUT
(1 to 8)
Press to select an output to switch followed by an input (also used for storing machine
setups (see
Section
6.3
)
12
INPUT
7-segment LED Display
Displays the input currently switched to the output which is marked above each input
6
VS
-4
8
HN
–
Ov
e
rv
ie
w